Cyclo Drive Reducer

Cycloidal pinwheel reducer is usually a up-dated of fresh type transmissing machine designed with K-H-V less teeth engagement and the cycloidal pin wheel clenching mechanism, which are trusted in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical Industry, conveyors, cranes and task machinery etc. various fields.

1. Gear is made from high durability low carbon alloy metal by carburizing and quenching. The hardness of tooth surface can reach HRC58-62. CNC grinding technology is used for all with high precision, good contact performance and gears
2. high transmission productivity: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light weight, long service existence and high bearing potential;
5. easy to disassemble, check and assemble.

Operation specifications and precautions
1.High modularization design: many equip with various engine or other power suggestions conveniently.Same machine type may equip with different power motor. It really is easy to understand the combination and
junction between every machine type.
2.Transmission ratio: okay division, wide scope. The combined equipment type may form very large transmitting ratio, i.e. outcome very low rotary speed.
3.Form of unit installation: the positioning to be installed isn’t limited.
4.High strength, small: the box body is made of high strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing ability of unitvolume is large.
5.Long life: Beneath the condition of right type chosen (including choosing appropriate operation parameters)normal procedure and maintenance, the life span of main elements of speed reducer (except sporting parts) shouldn’t be significantly less than 20000 hours. The wearing parts include lubricating bearing, oil and oil seal.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is going to be low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High velocity ratio and efficiency
Single stage transmission may reach to 1 1:87 of speed-straight down ratio and the efficiency is usually more than 90%. If employ multi-speed get the speed-down ratio is normally bigger.
2. Compact
Being adapted epicyclic transmitting basic principle, the input and outcome shaft are in same axis middle, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be acquired.The structure is easy, but it can realize high reduction ratio unit.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved as well, and there are two gears engaged with 180 degree symmetry. Subsequently, the affect of tooth pitch error and cumulative tooth pitch error on the rotation accuracy is relatively average, making the positioning precision and rotation precision reach an extremely high level.
4. Less parts, easy installation
The three basic parts achieve a higher deceleration ratio, plus they are all on a single axis, therefore the kit is simple to install and simple to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the quantity is 1/3, the weight is 1/2, but can obtain the same torque ability and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel material USES unique steel with large fatigue strength.Different from ordinary transmission product, the number of teeth meshing accounts for on the subject of 30% of the total amount of teeth. Additionally, it is in contact with the surface, so that the pressure borne by each equipment is reduced and substantial torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the power loss caused by friction. Therefore, high reduction ratio can be achieved while maintaining high efficiency, and miniaturization of driving motor could be realized.
8. Low noise
The apparatus meshing cycle quickness is low, the transmission movements force balance, which means procedure is quiet, and the vibration is very small.
◆Large speed ratio and large efficiency single-stage transmission can achieve a deceleration ratio of just one 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission can be used, the deceleration ratio will become larger.
◆Because planetary transmission principle is adopted, the input shaft and end result shaft are on the same axis line, so that the machine unit can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is much larger, and the mechanism of balancing machine parts creates the vibration and voice limited by a minimum.
◆Reliable use and very long service life since the primary parts are created from large carbon chromium steel, excessive strength is usually obtained by quenching (HRC58-62), and rolling friction can be used in a few transmission contacts, so the service life is prolonged.
Cycloid reducer is usually a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has many advantages, versatile, and can be both negative and positive operation.

•Big ratio, and large efficiency Smooth operation,

• low noise The utilization of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically no wear, durable.

• Compact structure,

• small size Because the application of a planetary transmitting, the type shaft and the output shaft on the same axis, making the model to get the smallest possible size.

• Reasonable design, easy maintenance, and break down easily install,

• minimal number of parts together with straightforward lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt integral double wall planet pinion precision, improve the output strength and carrier.

(2).Hoop clamp coupling have five connection ways suitable for different application environments.

(3).Size over PL/PF120(including)precision and high strength integral inner gear housing, processed in a single station,which eliminate the cumulative mistake and assembling mistake of split type.Eliminate casting process;adopt hot of forging process, that may reduce the blank material defects.

(4).The meshing gear adopt shaving procedure after carburizing and quenching,which much easier to make gear surface smooth and high precision,reduce the temperature rising caused by gear surface area gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its effectiveness and mounting dime nsions conform the same types of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, beautiful shape, radiate heat efficiently, compact structure and low noise.
Great sealing and adaptability.Its combo with T equipment reducer and MB/MBN variator can meet all types of speed requirement.


pto yoke

As one of leading pto yoke manufacturers, suppliers and exporters of mechanical products, We offer pto yoke and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto yoke

Recent Posts