Steel rewinding single phase electric motor best made in China – replacement parts – in Mosul Iraq Barrel Automatic Production Line with top quality

Steel rewinding single phase electric motor best  made in China - replacement parts -  in Mosul Iraq  Barrel Automatic Production Line with top quality

We – EPG Group the largest worm gearbox, couplings and gears manufacturing facility in China with 5 various branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Total metal drum manufacturing line


I. Raw supplies usage/manufacturing capacity

Plate thickness (mm) Finihed drums (pcs/T) Production ability (kg/pc)
1.2 forty one 21.5
1.0B Up and bottom covers 1.2 47 19
Drum human body 1.
1. 50 eighteen
0.9B Up and base addresses 1. 54 16.eight
Drum physique .nine
0.9 fifty six sixteen.2
.eight   97 10.28


II. Comprehensive steel drum production services

A. Entrance area tools
1. Decolier
two. Hydraulic Up-coiling unit
three. Hydraulic supporter
four. Aspect deviation rectifying device
5. Sizing & flattening device
6. Reducing equipment – for drum body
7. Chopping equipment – for waste sheet
8. Arch form guiding gadget
nine. Stac ept car
10. Hydraulic program
eleven. Electric management method
twelve. Leading & Bottom cover conveyor device

one.Hydraulic Up-Coiling  Device

   a) Up-Coiling Support System is for storing metal coil and facillitate Substance Feed Trolley for delivering materials.

   b) Content Feed Trolley is employed for have metal coil.. It is operated with hydraulic system to thrust cylinder for

   reciprocating linear motion and equipment box to deliver metal coil in parallel to the heart of uncoiling device so as to

   assure the repairing.

two.Decoiler & Hydraulic Supporter

a)Uncoiling width: 916-1320mm

b)Plate thickness: .6-1.2mm

c)Motor electrical power: 5.0KW

d)Uncoiler capability: 10t

e)Within diameter: ¢470-520mm, Outside the house diameter: ≤¢1200

f)Machine dimension: 3900x1500x1940(mm), Total fat: 5T

three.Sizing &Flattening Machine
Brief introduction:7 rollers doing work,servo automatic sizing,worm and equipment change the leveled plate thickness.

Purpose:The clearances of up and down rollers can be altered by the higher hand-wheel even though determine can be revealed by dial indicator. The operation linear speed is adjusted step-less. It can be controlled by the signal of mid-bridge for high and low speed change. 

Principal technics:

a)Plate width: 916-1320(mm)

b)Plate thickness:.6-1.2(mm)

four. Cutting Machine
Perform: Reduce the leveled metal plate into drum physique.

Principal technics:

a)Plate width:≤1500mm

b)Plate thickness:≤3mm

c)Motor power: 3.0KW

d)Slicing potential:≤20 moments/min

e)Machine measurement:1800x950x1500(mm),Complete excess weight: 3T

 5.Hydraulic Station

Purpose:Offer oil for the oil cylinder of decoiler, lifting device,uncoiling supporter,and overturn equipment to make sure stably functioning.

Primary technics:

a)Motor electrical power:7.5KW

b)Device measurement:800x800x1500(mm),Total fat: .5T

6.Electric Control Method
Purpose: Management the decoiler,flattening equipment and other entrance area equipments functioning.

B. Protect tools
one. Best & Bottom protect mould
two. Double loc ept mould
three. 63T urgent machine
4. 160T urgent device
5. Pre-coiling & Gluing device

one. Leading & Bottom go over mould

Limited introduction:Geared up with two sets of 160T pressing devices

Operate: Punching the bottom protect

Primary technics:

a)Motor electricity:18.5KW

b)Wor ept potential:5-26 pcs/min

c)Machine size:2185x1420x3070(mm),Total bodyweight: 14.5T

2.Drum Injection Mould

Limited introduction: Outfitted with one particular established of 63T pressing machine

Double punching mould: punch oil filler and breathable mouth of the base cover.

Equipment dimensions: 710x480x300(mm)

Whole bodyweight: .5T

Double loc ept mould: lock oil filler and breathable mouth of the bottom include.

Machine size: 710x480x300(mm)

Overall fat: .5T

Major technics:

a)Motor power: 11KW

b)Device dimension :1800x1232x2550(mm)

c)Overall fat: 5.5T

3.Pre-Coiling & Gluing Machine

Short introduction: Pre-coiling device for the bottom cover, cylinder thrust the cam to work, automatic glue- spaying method.It has benefits of security,stablity, sleek edging.

 Main technics:

a)Device dimensions:1600x1400x1350(mm)

b)Whole weight: 4.5T

C. Middle section equipment

1. Stac ept table
two. Circle-rolling equipment
three. Seam welding device
4. Edging & Beading machine
5. Corrugation (W Rib) device
six. Edge-curling machine
7. Express unit
eight. Electric powered handle program
nine. Leakage chec ept machine

1.Circle-rolling Equipment

Brief introduction:3 rollers doing work.

Major technics:

a)Rolled plated width:≤1100mm

b)Plate thickness:.6-1.2(mm)

c)Circle diameter:≤570mm

d)Motor power:1.5KW

e)Device size:2200x750x1300(mm),Whole fat: 1.5T

two.Seaming Device(BH-a hundred and fifty-5Z)

Quick instruction:This automatic seaming machine dismisses the spot welding approach,it is our recently  developed drum seaming machine.All of factors adopts domestic exceptional raw content,cupreous welding rollers.

Principal technics:

a)Welding Equipment ability:150KVA

b)Driving kind: pneumatic 

c)Current: alternating recent

d)Frequency assortment: large frequency

e)Wor ept idea : contravariant 

three.Edging&Beading Equipment

Quick introduction:controlled by PLC,hydraulic push

Principal technics:

a)Beading top:≤14mm

b)Drum top:894-905(mm)

c)Hydraulic program stress:8Mpa

d)Air force:.1Mpa

e)Equipment size:3700x700x1600(mm),Whole weight: 5T

Hydraulic Station:

Primary technics:

a) Device size: 1800x860x1700 (mm)

b) Total excess weight: 1T

c) Motor energy: 22KW

4.Corrugation (W rib) Device

Brief introduction:managed by PLC,hydraulic travel

Primary technics:

a)Corrugating height:≤3mm

b)W rib peak:≤9mm

c)Drum top:884-895(mm)

d)W rib area:280mm

e)Motor electricity:11KW

f)Device measurement:4500x650x2100(mm),Whole fat: 7T

Hydraulic station:   

a)Equipment dimension:1800x860x1700(mm)

b)Whole excess weight: 1T

c)Motor power: 7.5KW

5.Edge-Curling Device

Quick introduction:controlled by PLC,hydraulic drive,7 levels edge curling.

Primary technics:

a)Drum top:886-897(mm)

b)Motor energy:45KW

c)Equipment size:4800x1300x2200(mm),Total bodyweight: 13T

Hydraulic station:   

a)Device size:1800x860x1700(mm)

b)Complete excess weight: 1T

c)Motor electricity: 7.5KW

6.  Leakage Chec ept Device

Short introduction:Handbook/computerized manage,pneuma lock.

Major technics:

a)Chec ept drum diameter:560-570(mm)

b)Drum top:886-897(mm)


d) Machine measurement:2530x700x1100(mm),Complete bodyweight: 2T

7.Multi-part Convey Unit

Short introduction:Convey the drum human body to be edged,beaded,Corrugated W rib strengthened and sealed base include with PLC controlling.

Primary technics:

a) Motor power:4.0KW

b) Equipment dimension:11000x2100x1000(mm)

c) Overall weight: 3T

D. Rear area gear
one. Front area trans-line
two. Degreasing & Phosphorization space
three. Washing & Drying place
4. Overturn gear
five. Portray space
six. Entrance drum-separation machine
seven. Drying room following painting
eight. Bck drum separation equipment
nine. Air cooling program
10. Rear section trans-line
11. Electrical handle program

1. Degreasing & Phosphorization Space

Quick introduction: This element is utilised to transportation the drums,controlled by PLC, adopts spraying unit to computerized cleanse the coil, phosphorize and washing the grease on the drums. The conveyor device adopts excellent steel, inwalls are created of  1mm metal plate.

Principal technics:

a)Device dimensions:36000x2110x2060(mm)

b)Total weight: 30T

2. Washing & Drying Space

Quick introduction:Drying the water on the area of the drum, managed by PLC.The whole machine adopts fuel heating units.Fan is put in on the best of the space, so that very hot and biking wind can be produced to speed up the drying.

Major technics:

a) Motor energy:25KW

b) Device measurement:20000x1920x3600(mm)

c) Whole weight: 25T

three.Painting Space(double shades)

Function:  The conveyor device is controlled by PLC, rotating table make the drums intently, painting program paint the drums in & outside the house with the spray gun. A single color or a variety of can be alternative. Mode of water-curtain spraying dispels spraying smoke.Nozzle adopts Nordson Brand, Portray gear is manufactured of Chang Jiang.

Principal technics:

a) Motor electricity: 55KW

b) Machine dimensions: 7400x4990x3600(mm)

c) Total weight: 15T

four.Front Drum Distributor

Purpose: Transport the drums to the conveyor line of exterior portray&stiffening space, the cylinder is controlled by PLC.

Primary technics:

a) Motor energy: 2.0KW

b) Device dimension: 1500x1050x800(mm)

c) Complete excess weight: 1T

5.Drying Line after Portray

Function: The conveyor gadget is managed by PLC, adopts fuel heating inwall of the area is outfitted with heating tubes. Admirer is mounted on the prime of the space, so that dry the paint.

Principal technics:

a) Motor energy: 35KW

b) Device size: 36000x2100x4300(mm)

c) Complete excess weight: 30T

6.Down-drum Roller Trans-line

Operate: The device transports the dried drums to the floor.

Main technics:

a) Motor electrical power: 1.5KW

b) Equipment dimensions:2000x900x800(mm)

c) Total weight: .3T

seven.Overturn Tools

Operate: Adjust the point out of drums from horizontal to vertical, so that it will be much easier to paint, managed by Cylinder.

Principal technics:

a) Equipment dimensions: 1400x690x850(mm)

b) Complete excess weight: .5T













/ The use of original equipment manufacturer’s (OEM) component numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our firm and the shown alternative parts contained herein are not sponsored, approved, or created by the OEM. /

Steel rewinding single phase electric motor best  made in China - replacement parts -  in Mosul Iraq  Barrel Automatic Production Line with top quality

Steel rewinding single phase electric motor best  made in China - replacement parts -  in Mosul Iraq  Barrel Automatic Production Line with top quality

pto yoke

As one of leading pto yoke manufacturers, suppliers and exporters of mechanical products, We offer pto yoke and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto yoke

Recent Posts